ALEXANDER – Chesapeake

€249

ALEXANDER – Chesapeake

Stereo-Chorus-Vibrato

Warning: Those who venture too far into the depths of the Chesapeake may be overcome by the harmonic waves and slip into a swirling, dream-like euphoria. Swim at your own risk.

Power Supply:
The Chesapeake requires a 9V DC power supply with a 2.1 mm pin, center negative. Power the Chesapeake from an outlet or supply capable of providing at least 75 mA of current. The Chesapeake is not designed to be powered on supplies higher than 9V and does not use a battery. The Cheasapeake should work fine on a multi-pedal ‘daisy chain’ connector, but if you encounter excessive noise or hum try a separate power supply.

1 op voorraad

Categorie:

Beschrijving

ALEXANDER – Chesapeake

Stereo-Chorus-Vibrato

Warning: Those who venture too far into the depths of the Chesapeake may be overcome by the harmonic waves and slip into a swirling, dream-like euphoria. Swim at your own risk.

Connections:
Stereo output: The Chesapeake features a TRS (tip-ring-sleeve) output jack. The tip carries a mix of effected (wet) and clean signals, als determined by the Mix knob. The ring carries a buffered dry signal. Set the Mix control fulle wet for the maximum amount of stereo separation.

Remote Tap Tempo Jack: Connect a normally-open momentary footswitch to this jack to set the modulation time remotely. Hold down the remote footswitch to change tap divisions.

Gerelateerde producten